RUST GRIP
Recommended primer beneath ENAMO GRIP® on metal. RUST GRIP® encapsulates existing rust and seals the substrate; ENAMO GRIP® adds UV protection, color, and a tough topcoat — a full sealing system for steel.
Read more
ENAMO GRIP — two-component polyurethane enamel topcoat
Two-component, moisture-curing polyurethane enamel for UV protection, color, and chemical resistance over steel, aluminum, concrete, and wood.
ENAMO GRIP
ENAMO GRIP® is a tough, medium-speed, two-component moisture-curing polyurethane enamel. Used as a topcoat for UV protection, color, and industrial-strength chemical-splash resistance — typically applied over RUST GRIP® for full encapsulation. Compatible substrates include steel, aluminum, concrete, and wood. Applications: ship hulls and other underwater surfaces, bridges and infrastructure, architectural maintenance, and flooring where a tough, long-wearing surface is required.
Application: airless or pot spray (tip 0.024, two coats); roller (1/4″ nap, two coats); or brush (two coats). Anti-slip is not inherent — anti-slip elements can be added on request when extra traction is required.
Project gallery
Frequently asked questions
What exactly is ENAMO GRIP®?
A medium-speed, two-component moisture-curing polyurethane enamel. Used as a topcoat for UV protection, color, and industrial-strength chemical-splash resistance. Sold and applied as part of the SPI Coatings system.
Is the product anti-skid?
No — not inherently. SPI explicitly states that anti-slip is not a built-in property of ENAMO GRIP®. Anti-slip elements can be added on request when extra traction is needed — for example on industrial floors, ramps, or ship decks.
Which substrates can it be applied to?
Steel, aluminum, concrete, and wood. On metal, ENAMO GRIP® is typically used as a topcoat over RUST GRIP® for full encapsulation of the substrate against corrosion and UV.
What are typical applications?
Ship hulls and other underwater surfaces, bridges and infrastructure, architectural maintenance of exteriors and interiors, and flooring that needs a tough, long-wearing finish. Anywhere UV resistance and minimal maintenance matter.
How is ENAMO GRIP® applied?
Airless or pot spray (tip 0.024, two coats), 1/4″ nap commercial roller (two coats), or brush (two coats). Mix the two components in exact ratio before application and respect the product's pot-life window after mixing.
Complete the system
SUPER THERM
When thermal management is also needed on exterior architecture. SUPER THERM® blocks solar heat on roofs and facades; ENAMO GRIP® delivers color and UV durability where appearance matters most.
Read moreHPC COATING
For surfaces also exposed to high heat — e.g. external bridge piping. Use HPC® on hot sections and ENAMO GRIP® as the topcoat on the surrounding structure.
Read more